GLASS SOLAR SYSTEM


TECHNICAL CHARACTERISTICS OF GLASS STORAGE TANK:
Storage Tank: From European 2,5mm thick steel with special enamel coating for very long lifetime
Second copper shell: From European 1,5 mm thick steel sheet
Insulation: expanded high-density polyurethane (50 kgr/m3) thickness of 60 mm.
Thermal insulation conductivity: 0,023 W / mK.
Anodium Rod Protection
External Cover: in four types according to your needs (grey, inox, white ral 9002, brown).
Side lids: specially designed and shaped lids, without need for ancillary screws.
Electrical resistance: power according to the regulations of the country of destination, with a thermostat unipolar control and bipolar protection.
Receptor for the strain of the thermostat.

 

DEFINITION AND PROPERTIES OF ENAMELING

WHAT IS ENAMELING

Enamelling is the special glass surface created by melting and association of enamel onto a steel surface.

The enamel-which is a mixture of mineral-silicates, is completely healthy and environmentally friendly, since it does not contain hazardous chemicals, are soluble in water and heated at high temperatures (> 850 ° C).

The implementation of anti-rust gives excellent protection and resistance to sudden changes in temperature (thermosok) and provides the most economical solution for protection in boilers and electrical stoves.

PROPERTIES of ENAMEL

• Protection from all forms of oxidation (glass coating)-resistance in all weather conditions.
• Absolutely safe for public health-fulfillment of hygiene rules-does not allow the growth of bacteria.
• resistance to acids, graffiti and solar radiation.
• Resistance to sudden changes in temperature (-60 ° C up to +450 ° C).
• There is no maintenance need, it is easy to clean - painting ability.
• Not flammable, doesn’t tow the dust.
• Electrical neutral combination of enamel-iron sheet.
• Suitable for any water quality (including salt).
• Recyclable - environmental friendly.
• Long-term safety and security.
• More economical than any other solution.

 

TECHNICAL CHARACTERISTICS OF SELECTIVE COLLECTORS


Technical characteristics of collector PHAETHON:


Copper and aluminium are the materials used, that are corrosion-resistant materials that last for many decades. No steel parts are corroded
Frame: aluminum profiles, lateness design with internal corner aluminum links, that ensure the best possible implementation of the framework and the stability of the whole construction.
Absorber: of selective surface, 4 mm full plate, with special coating of titanium that is produced in Germany. The absorber surface of solar radiation is in absolute application on the copper pipes with high-tech laser welding for direct transmission of the heat to the thermal fluid. This ensures a very high absorption coefficient α> 95% and a very low coefficient of losses of <5%, which contributes to the maximum thermal efficiency of the collector.
Back of collector: aluminum foil, fully sealed, without screw connections.
Glass: security, tempered, 4 mm, of high permeability t> 0.94.
Insulation: Glasswool (d = 30kg / m3) at the back of the collector as well as at the lateral parts.

Specially designed oval rubber, adapted to copper pipes that connect the collector, to prevent the phenomenon of dilation - contraction.

 

Technical characteristics of collector ATLAS:


Copper and aluminium are the materials used, that are corrosion-resistant materials that last for many decades. No steel parts are corroded
Frame: aluminum profiles, lateness design with external corner aluminum links, that ensure the best possible implementation of the framework and the stability of the whole construction.
Absorber: of selective surface, 4 mm full plate, with special coating of titanium that is produced in Germany. The absorber surface of solar radiation is in absolute application on the copper pipes with high-tech laser welding for direct transmission of the heat to the thermal fluid. This ensures a very high absorption coefficient α> 95% and a very low coefficient of losses of <5%, which contributes to the maximum thermal efficiency of the collector.
Back of collector: aluminum foil, fully sealed, without screw connections.
Glass: security, tempered, 4 mm, of high permeability t> 0.94.
Insulation: Glasswool (d = 30kg / m3) at the back of the collector.

Specially designed oval rubber, adapted to copper pipes that connect the collector, to prevent the phenomenon of dilation - contraction.


Dimensions in cm & weights of COPPER solar system with collectors Phaethon

Dimensions in cm & weights of COPPER solar system with collectors Atlas

 

 

COPPER SOLAR SYSTEM

TECHNICAL CHARACTERISTICS OF STORAGE TANKS:
1. Storage tank: From copper Cu specially created from 2 half cup-shaped pieces welded to each other with a single seam sealant.
2. Second Copper Shell: From copper without add-ons and in accordance with international standards for copper.
3. Input of cold water and hot water output: Copper Pipes diameter Ø 21 X 2.2 and threaded ½.
4. Adjusting mouth of safety valve of closed circuit: Copper tube ½.
5. Insulation: puffed high density polyurethane (44 kgr/m3), 60 mm thickness.
6. Thermal conductivity of insulation: 0.0180 W / mK.
7. External cover: in four types according to your needs (grey, inox, white ral 9002, brown).
8. Side covers: specially designed and patented laminate-fixed lids, without screw helpers.
9. Electrical resistance: power according to the regulations of the country of destination, with a thermostat unipolar control and bipolar protection.
The resistance is mounted on a specially formed 3 mm brass flange, threaded 8-tapping screws, for easy installation or replacement in case of damage.
10. Receptor of the strain of the thermostat.


boiler-tomi-kopsimo_sm

 

 

 

 

 

 

 

TECHNICAL CHARACTERISTICS OF SELECTIVE COLLECTORS

Technical characteristics of collector PHAETHON:


Copper and aluminium are the materials used, that are corrosion-resistant materials that last for many decades. No steel parts are corroded
Frame: aluminum profiles, lateness design with internal corner aluminum links, that ensure the best possible implementation of the framework and the stability of the whole construction.
Absorber: of selective surface, 0.5 mm full plate, with special coating of titanium that is produced in Germany. The absorber surface of solar radiation is in absolute application on the copper pipes with high-tech laser welding for direct transmission of the heat to the thermal fluid. This ensures a very high absorption coefficient α> 95% and a very low coefficient of losses of <5%, which contributes to the maximum thermal efficiency of the collector.
Back of collector: aluminum foil, fully sealed, without screw connections.
Glass: security, tempered, 4 mm, of high permeability t> 0.94.
Insulation: Rockwool (d = 50kg / m3) at the back of the collector as well as at the lateral parts.

Specially designed oval rubber, adapted to copper pipes that connect the collector, to prevent the phenomenon of dilation - contraction.

Technical characteristics of collector ATLAS:


Copper and aluminium are the materials used, that are corrosion-resistant materials that last for many decades. No steel parts are corroded
Frame: aluminum profiles, lateness design with external corner aluminum links, that ensure the best possible implementation of the framework and the stability of the whole construction.
Absorber: of selective surface, 0.5 mm full plate, with special coating of titanium that is produced in Germany. The absorber surface of solar radiation is in absolute application on the copper pipes with high-tech laser welding for direct transmission of the heat to the thermal fluid. This ensures a very high absorption coefficient α> 95% and a very low coefficient of losses of <5%, which contributes to the maximum thermal efficiency of the collector.
Back of collector: aluminum foil, fully sealed, without screw connections.
Glass: security, tempered, 4 mm, of high permeability t> 0.94.
Insulation: Rockwool (d = 50kg / m3) at the back of the collector.

Specially designed oval rubber, adapted to copper pipes that connect the collector, to prevent the phenomenon of dilation - contraction.

 

 

 

Dimensions in cm & weights of COPPER solar system with collectors Phaethon

 

Dimensions in cm & weights of COPPER solar system with collectors Atlas

 

 

 



 

Certified products according to international standards

SONNE cooperations and memberships

Head Offices

39, Chalkidikis str.
14451 Metamorfosi, Athens, Greece

Find us on the map
Contact

Telephone: +30 210 2843376
Fax: +30 210 2841650

Email: info@sonne.gr
Open

Monday- Friday: 8 AM - 4 PM
Saturday- Sunday: closed